Sonocatalytic degradation of EDTA in the presence of Ti and Ti@TiO2 nanoparticles

The sonocatalytic degradation of EDTA (C₀ = 5 10⁻³ M) in aqueous solutions was studied under 345 kHz (P_ac = 0.25 W mL⁻¹) ultrasound at 22–51 °C, Ar/20%O₂, Ar or air, and in the presence of metallic titanium (Ti⁰) or core-shell Ti@TiO₂ nanoparticles (NPs). Ti@TiO₂ NPs have been obtained using simultaneous action of hydrothermal conditions (100–214 °C, autogenic pressure P = 1.0–19.0 bar) and 20 kHz ultrasound, called sonohydrothermal (SHT) treatment, on Ti⁰ NPs in pure water. Ti⁰ is composed of quasi-spherical particles (30–150 nm) of metallic titanium coated with a metastable titanium suboxide Ti₃O. SHT treatment at 150–214 °C leads to the oxidation of Ti₃O and partial oxidation of Ti⁰ and formation of nanocrystalline shell (10–20 nm) composed of TiO₂ anatase. It was found that Ti⁰ NPs do not exhibit catalytic activity in the absence of ultrasound. Moreover, Ti⁰ NPs remain inactive under ultrasound in the absence of oxygen. However, significant acceleration of EDTA degradation was achieved during sonication in the presence of Ti⁰ NPs and Ar/20%O₂ gas mixture. Coating of Ti⁰ with TiO₂ nanocrystalline shell reduces sonocatalytic activity. Pristine TiO₂ anatase nanoparticles do not show a sonocatalytic activity in studied system. Suggested mechanism of EDTA sonocatalytic degradation involves two reaction pathways: (i) sonochemical oxidation of EDTA by OH/HO₂ radicals in solution and (ii) EDTA oxidation at the surface of Ti⁰ NPs in the presence of oxygen activated by cavitation event. Ultrasonic activation most probably occurs due to the local heating of Ti⁰/O₂ species at cavitation bubble/solution interface.     

Bifurcation analysis of visual angle model with anticipated time and stabilizing driving behavior

In the light of the visual angle model (VAM), an improved car-following model considering driver's visual angle, anticipated time and stabilizing driving behavior is proposed so as to investigate how the driver's behavior factors affect the stability of the traffic flow. Based on the model, linear stability analysis is performed together with bifurcation analysis, whose corresponding stability condition is highly fit to the results of the linear analysis. Furthermore, the time-dependent Ginzburg-Landau (TDGL) equation and the modified Korteweg-de Vries (mKdV) equation are derived by nonlinear analysis, and we obtain the relationship of the two equations through the comparison. Finally, parameter calibration and numerical simulation are conducted to verify the validity of the theoretical analysis, whose results are highly consistent with the theoretical analysis.     

Design of Functional Carbon Composite Materials for Energy Conversion and Storage

The carbon composite materials have been a research hotspot in the fields of catalysis, energy conversion and so on, because of their features of large structure and morphology variety, good chemical and electrochemical stability, and high electronic conductivity, large specific surface area and rich active sites. This paper summarizes some research progress of carbon composite materials, including assembly methodologies, their structure regulation, properties, and related applications. Moreover, the current challenges and the prospects of these materials are also discussed.     

Asymptotic growth bounds for the 3‐D Vlasov‐Poisson system with point charges

In this article, we consider the asymptotic behavior of the classical solution to the 3‐dimensional Vlasov‐Poisson plasma interacting repulsively with N point charges. The large time behavior in terms of diameters of its velocity‐spatial supports is improved to O(t^2/3+ϵ) for any ϵ>0.     

The self-assemblies of a newly designed star-shaped molecule end-capped with bromine atoms studied by scanning tunneling microscopy

A new star-shaped molecule StOF-Br_3 containing oligofluorenes and halogen atoms(Bromine) has been synthesized and studied by Scanning Tunneling Microscopy(STM) at the highly oriented pyrolytic graphite(HOPG) surface.We have obtained the high-resolution self-assembled STM images,from which the highly ordered and closely packed non-porous arrangements of the StOF-Br_3 molecular selfassemblies at the heptanoic acid/HOPG surface could be observed.The molecular models and selfassembled StOF-Br_3 architectures have been given in the following text.Besides,we have also figured out the surface free energy by the density functional theory(DFT) calculation,which proved that the halogen...halogen interaction was strong enough to stabilize the ordered molecular self-assemblies.This work verifies the existence of bromine...bromine interactions,and meanwhile provides a kind of effective approach for quickly building ordered molecular nanoarchitectures with large areas and different geometries.     

A study on anomalous yield drop behaviour in modified beta titanium alloys

ABSTRACT

The yield drop phenomenon observed in the Ti–15V-3Al–3Sn-3Cr (Ti–15–3) beta-titanium alloy and its anomalous behaviour in the boron and carbon added Ti–15–3 alloys have been studied. While the base and the carbon containing alloys exhibit yield drop, the boron containing alloy with smaller grain size than base alloy does not appear to show this phenomenon. Tensile tests were interrupted at different stress levels followed by analyses of slip lines and sub-structural characteristics using scanning and transmission electron microscopes to understand this anomalous yield point phenomenon. Infrared thermal imaging technique was used to map the strain localisation and the spatiotemporal evolution of deformation along the gauge length of the specimens during the tensile tests. Deformation in these alloys initiates only in a few grains. Pile-up of dislocations in these grains subsequently triggers the formation of dislocations in other grains and their rapid multiplications. The spreading of deformation by the generation of dislocations from pile up dislocations in one grain to neighbouring un-deformed grains and their rapid multiplication to new regions influence the yield drop phenomenon and its characteristics. It is shown in this study that microscopic instability in the grain level is a necessary, but not the sufficient condition for the manifestation of macroscopic instability during tensile deformation in polycrystalline materials. The presence of boride particles at grain boundaries restricts the slip transfer across the grains as well as the spreading of deformation to new regions, which causes the suppression of yield drop in the boron containing alloy.     

On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.     

基于平面度的燃料电池电化学性能模拟

 固体氧化物燃料电池的翘曲会影响电极-盖板界面的接触情况，从而影响电化学性能，对相关制造工艺提出了很大的挑战．为了分析燃料电池平面度对放电过程的影响，揭示其潜在的风险，我们建立了两个基于有限元法的仿真模型，对考虑平面度缺陷的燃料电池封装和放电进行分析．在对固体氧化物燃料电池进行平面度测量的基础上，首先建立了具有真实燃料电池翘曲特性的几何模型，分析封装过程中接触压力的分布情况．然后将接触电阻的仿真结果导入到三维多物理场耦合模型中，模拟具有平面度缺陷的燃料电池电化学性能．计算结果展示了燃料电池两侧封装过程中接触压力的分布情况．通过对比有接触电阻和无接触电阻的燃料电池电流密度，分析了电池与盖板的接触对放电过程的影响．结果表明，燃料电池的凹陷面较难达到满意的接触状态，需要比凸起面更大的封装压力．燃料电池表面接触电阻的变化将引起电流传导路径的变化，产生局部高电流或低电流．这项工作强调了在燃料电池中保持均匀分布的接触电阻的重要性，为今后的优化工作奠定了基础．     

Experimental studies on the effect of ultrasonic treatment and hydrogen donors on residual oil characteristics

Residual oil, the residue after the distillation of crude oil, imposes deleterious effects on refinery due to its high viscosity and asphaltene content. In this context, ultrasonic technology has been widely applied in refining processes given its high efficiency and minimal environmental impacts. To guide the selection of operation parameters, in this work, we probed the effect of treatment duration, power, and hydrogen donor on the characteristics of residual oil under ultrasonic treatments. Underlying mechanisms of ultrasonic treatments, in the absence and presence of hydrogen donors, were verified through systematically analyzing viscosity, component conversion, molecular weight, hydrogen distribution, and functional groups of residual oil. While viscosity reductions under low-power density treatment are caused by colloidal system disaggregation, high-power density treatment can bring in both chemical bond cleavage and colloidal system disaggregation. In addition, adding hydrogen donor can effectively prevent radical recombination, and thus increases the yield of saturate. These results provide fundamental understandings on the effects of ultrasonic treatments.     

小直径棒材超声横波检测仿真分析

采用超声水浸聚焦斜入射方式进行小棒材表面、近表缺陷检测时,声波在水/棒和棒/缺陷界面会发生反射、折射、散射、衍射及波形转换等一系列物理变换。此时缺陷可检性对声波入射条件十分敏感,常出现由于检测条件设置不当而导致缺陷漏检、误检的情况。为解决这一问题,本文针对小棒材超声斜入射检测中的主要参数——入射角和水距,开展声场及缺陷声响应仿真,研究检测参数对不同部位缺陷检测能力的影响,并对仿真结果进行试验验证。通过研究得到了检测水距、入射角度对缺陷检测能力的影响,并得到最优检测条件。试验验证结果表明研究制定的检测方案可有效检测出表面、近表面裂纹缺陷。